特點

▲ 防止工作機械因油溫的變化而影響精度。
▲ 防止油質因高溫劣化，保持油液粘度不變，使工作機械  穩定工作。
▲ 附有自動故障報警功能，可通過特定的方式及時提醒用戶對裝置進行檢修，以免機件損壞。
▲ 油溫控制以機體溫度(室溫)為依據，用戶可根據機體溫度設定油溫，防止機械結構產生熱變形。
▲ 沉浸式油液冷卻控溫裝置不受雜質污染，不受切削金屬粉末等所干擾，清潔簡單、保養容易 安裝簡便，不占 空間。

▲ Prevent mechanical work due to oil temperature changes may affect the accuracy.
▲ To prevent deterioration due to high temperature oil to maintain oil viscosity constant， mechanical stability to the work.
▲ With automatic fault alarm functions， through a specific and timely manner to remind the user of the device for repair， so as to avoid mechanical damage.
▲ Oil temperature control to body temperature (room temperature)as the basis， the user can set the temperature according to body oil， to prevent thermal deformation of the mechanical structure.
▲ Immersion oil cooling temperature control device from impurity contamination from metal powder， etc. interfere with cutting，cleaning is simple， easy to maintain easy to install， does not occupy space.

產品簡介
Introduction

冷油機是文恵自行研發設計的一款精密型制冷機，多數采用風冷散熱方式 是由PID系統控制，選用進口溫控器，溫差為±1℃，進口耐高溫泵浦，高壓力，大流量，采用高效316不銹鋼板式換熱器達到最佳冷熱交換效能。選用高效進口品牌壓縮機，使用壽命長久。機內主要控制電器和操作元件均為進口名牌，備更換媒體閥門，使用方便、優良堅固機架，護養極便。

Wenhui cold oil machine is a sophisticated research and design their own type of refrigerator， the majority of air-cooling methods is controlled by a PID system， selection of imported thermostat， temperature difference of ±1℃， imports of high-temperature pump， high pressure， high-volume， high-efficiency316 stainless steel plate heat exchanger cold switching perform ance to achieve the most short-tailed bird. Selection of an efficient compressor imported brands， long service life. Inside the main control and operation of electrical components are imported brands， media， equipment replacement valve， easy to use，good solid frame， nursing will be very.

適用范圍

▲ 車床、高速車床
▲ 內、外徑研磨機
▲ 放電加工機
▲ 油壓機械
▲ 磨床、拉床、銑床
▲ 綜合加工中心機
▲ 木工雕刻機、切削機械等等

▲ Lathes，high speed lathe
▲ Internal，OD grinding machine
▲ EDM
▲ Hydraulic machinery
▲ Grinding，broaching，milling

▲ Machining Center
▲ Woodworking engraving 、machine，cutting machine，etc.